Tracking Kit GPRS+GPS (Arduino)


Available: 1/1


Description:

This kit includes the GPRS+GPS Quadband Module (SIM908) that will allow you to make real time tracking applications. With this module you can read GPS coordinates (longitude and latitude) and send them by using a HTTP request to a web server.

You will be able to make applications like sending a temperature sensor data through sms, controlling a servo with text messages, making a call or tracking a vehicle in real time or anything you can imagine making use of GPRS/GPS technologies.


Includes:

  • Arduino UNO Rev.3 1
  • USB Cable 1
  • Power Adapter ACDC 12V 2A 1
  • GPRS+GPS Quadband Module for Arduino, Raspberry Pi and Intel Galileo (SIM908) 1
  • Internal 4G-3G-GPRS-GSM Antenna 1
  • Internal GPS Antenna 1
  • Starter Kit Box
  • - "Starter Kit" Sticker 1
  • - Arduino Jumper Cables 1
  • - Breadboard clear 1
  • - Resistor 1/4W 5% 220 ohm 20
  • - Resistor 1/4W 5% 100 ohm 10
  • - Resistor 1/4W 5% 10 K 10
  • - Resistor 1/4W 5% 4,7 K 10
  • - Resistor 1/4W 5% 1 M 10
  • - Potentiometer 10K 2
  • - Push Button 12x12 B3F-4150 4
  • - Temperature Sensor (MCP9700) 1
  • - 5mm Red Led 10
  • - 5mm Green Led 10
  • - 9v To Barrel Jack Adapter 1
  • - LDR Sensor 1
  • - Sugus 4
  • - Piezo Speaker (ref.10066) 1
  • - 5mm Triple Output Led RGB (Common Anode) 1
  • - 9G Micro Servo 1
  • - Hobby Motor 1
  • - LCD 16*2 Characters - Green Yellow back light 1
  • - Transistor BC547CG 1

Go to top